空开选型国家标准选用空气开关一般是按用电器电流的1.2倍选择即可(在“家庭电路”中有详细标准)。比如220V电压时,某电器功率为5000W,计算电流为23A左右,则23A×1.2倍=27.6A,选择标准系列30A空开即可。空气开关有两项重要...
有功功率的计算公式是什么? 有功功率P=I*U*COSφ,其实有功功率P、无功功率Q、视在功率S就是一直角三角形的三条变:S为斜边,P、Q为两直角变,P、Q就是把S正交分解出来的两个分量;P^2+Q^2=S^2(勾股定理)。功...
(一)稳压二极管工作原理 稳压二极管的作用: 稳压二极管也叫稳压管,它在电路中一般起到稳定电压的作用,也可以为电路提供基准电压值。 稳压二极管的工作原理: 稳压二极管使用特殊工艺制造,这种工艺使它在反向击穿时仍然可以长时间稳定工作,不损坏,...
这篇内容是对一些“众所周知”的功率测量参数的简单描述,这些测量参数是经常用到的,但是事实上很少的人能记住,他们来自哪里,什么是他们的确切定义。 没看过上一篇(一)的朋友可以点击这里:这些“众所周知”的功率测量参数,它们确切定义你真的知道吗?...
电流的方向与正电荷在电路中移动的方向相同。实际上并不是正电荷移动,而是负电荷移动。电子流是电子(负电荷)在电路中的移动,其方向为电流的反向。电流强度可以用公式表达为:。 其中,Q为电量(单位是库仑),t为时间(单位是秒)。 (部...
1、综述 铜芯线的压降与其电阻有关,其电阻计算公式: 20℃时:17.5÷截面积(平方毫米)=每千米电阻值(Ω) 75℃时:21.7÷截面积(平方毫米)=每千米电阻值(Ω) 其压降计算公式(按欧姆定律):V=R×A 线损是与其使用的压降、电...